Maeve vintage moonstone engagement ring in sterling silver, photographed on a white marble and labradorite plinth in soft daylight

Metal Guides

What Is Rhodium Plating? Silver, White Gold and How Long It Lasts

  • Made to order
  • Ethically sourced gemstones
  • Free US & worldwide shipping

Rhodium plating is a thin electroplated layer of rhodium, a rare platinum-group metal, bonded to the surface of a piece of jewelry. It gives white gold its bright mirror-white color and gives sterling silver a whiter, harder surface that resists tarnish. The layer is a fraction of a micron to a couple of microns thick, so it slowly thins at contact points and can be renewed at a jeweler's bench. The metal underneath never changes.

Rhodium Plating at a Glance

  • The metal: rhodium, Rh, atomic number 45, a platinum-group metal discovered in 1803 by William Hyde Wollaston.
  • The layer: electroplated, from a fraction of a micron to about two microns; thicker rhodium cracks, so thickness is the durability story.
  • Why white gold: gold alloys are warm gray; rhodium supplies the mirror white and a harder skin.
  • Why sterling silver: a tarnish barrier, a whiter color and a harder surface, with a no-abrasives care rule.
  • At Aquamarise: sterling is solid 925 silver with a rhodium finish; white gold is solid gold finished in rhodium; black pieces are black ruthenium.
  • Wear: the finish thins at contact points and can be refinished at a bench; the metal beneath is unchanged.

What Rhodium Plating Is

A thin electroplated layer of one precious metal over another.

Rhodium plating is the electrodeposition of a very thin layer of rhodium onto metal jewelry. The piece goes into an acidic bath holding dissolved rhodium, a current runs through it, and rhodium settles onto every surface the solution touches. The result is the brightest, whitest surface the jewelry trade knows how to make. It is standard on white gold and common on sterling silver, and because rhodium is harder than either metal and does not tarnish in air, it also protects what sits beneath it.

The trade calls the process plating. On a solid sterling silver or solid gold piece, though, the result is better described as a finish: a thin layer of one precious metal over another, not a coating that hides a base metal. That is how Aquamarise describes its own pieces. Every sterling ring we make is solid 925 sterling silver with a rhodium finish, and our white gold is solid 10K, 14K or 18K gold, made to order, finished in rhodium the way nearly all white gold is. That is the most useful thing to know about the words "rhodium plated" on a listing.

Clear kite-cut center stone with marquise accents, stacked between two pave chevron bands in bright sterling silver, worn on a hand

Rhodium, the Metal

Atomic number 45, rarer than gold, and priced accordingly.

Rhodium is element 45, symbol Rh, one of the six platinum-group metals. The Royal Society of Chemistry calls it the rarest of all non-radioactive metals; its abundance in the Earth's crust is about 0.000037 parts per million. It was discovered in 1803 by the English chemist William Hyde Wollaston while he was refining crude platinum, and he named it from the Greek rhodon, rose, for the rose-red color of its salts. Hard, silvery white and highly reflective, it is not corroded or tarnished by air at room temperature.

Almost no rhodium is mined for its own sake. It is recovered as a by-product of refining platinum, nickel and copper ores. The US Geological Survey lists South Africa as the world's leading producer of platinum-group ores; the Royal Society of Chemistry names South Africa, Russia and Zimbabwe as the top three rhodium producers. World output is only about 30 metric tons a year, and roughly 80 percent of it goes into catalytic converters.

That supply picture explains a famously volatile price: under $700 a troy ounce in 2016, nearly $30,000 in 2021. The USGS annual averages run $20,254 an ounce in 2021, when gold averaged $1,801, then $4,660 in 2024 and an estimated $5,800 in 2025 against an estimated $3,300 for gold. A metal that has sold for eleven times the price of gold is affordable on a silver ring because a one-micron layer weighs only a few milligrams.

How Rhodium Plating Works

Polish, clean, strike, plate, rinse. The thickness decides everything.

The piece becomes the cathode, the negative electrode, in a bath of dissolved rhodium salts; direct current pulls positively charged rhodium ions out of solution and reduces them to metal on the surface. A commercial decorative bath, per one maker's operating sheet, is a rhodium concentrate in sulfuric acid at a pH below 1, run at about 40 °C (104 °F) and two volts with platinized-titanium anodes, depositing roughly a tenth of a micron per minute. At that rate a thirty-second dip lays down about a twentieth of a micron, a true flash; a layer that will stand up to a ring's life takes minutes.

  1. Polish. Rhodium is bright but not thick enough to hide anything, so the piece is polished to its final surface first.
  2. Clean. Degreasing in an alkaline or ultrasonic bath, then electrolytic cleaning, then rinses ending in deionized water. Any residue stops the rhodium from bonding there.
  3. Strike, if needed. A strike is a very thin preliminary deposit, typically under a tenth of a micron, laid down for adhesion. Rhodium can go directly onto silver, gold, copper alloys and nickel; on base metals such as zinc, tin or iron an intermediate nickel layer several microns thick is essential.
  4. Plate. Seconds to several minutes, depending on the thickness ordered. Stones usually stay set.
  5. Rinse and dry. No buffing afterward. Buffing is what removes rhodium.

Thickness is the whole story because the finish fails by abrasion, not chemistry. Rhodium does not tarnish, oxidize or react with skin; it is rubbed away, and a layer twice as thick lasts about twice as long. The ceiling is set by the metal itself: electrodeposited rhodium carries high internal tensile stress and cracks past a couple of microns, so jewelry deposits are typically kept to about 2.5 microns or less. The deposit is also very hard, around 800 to 900 Vickers in the bath maker's data, where pure silver and gold measure in the low tens. A showroom flash and a two-micron deposit come out of the same bath; only the time differs.

Pear white sapphire Art Deco bridal ring set in sterling silver with a bright rhodium finish, worn on a hand.

Why White Gold Is Rhodium Plated

Gold is yellow. "White" gold is a compromise, and rhodium finishes the argument.

Pure gold is a slightly reddish yellow and stays yellow when alloyed. White gold is gold mixed with at least one white metal, usually nickel or palladium, often with silver, zinc or copper as well; a common formulation is 90 percent gold and 10 percent nickel. The result is a pale, warm gray rather than a true white, so most white gold sold today is finished with a very thin layer of rhodium, which gives it a brilliance comparable to platinum. The trade calls that step rhodium flashing.

The rhodium does three jobs. It supplies the color: the icy mirror white people picture when they say "white gold" is rhodium, not gold. It supplies a harder skin than the alloy beneath. And it sits between skin and alloy, which matters for nickel white gold, since nickel is the most common cause of jewelry rashes; for what that means metal by metal, read is sterling silver hypoallergenic.

"My white gold ring turned yellow"

It did not. The rhodium thinned where the ring rubs, and the alloy's own warmer color is showing through. The underside of the band goes first, then the edges of the shank and the tips of the prongs. The ring is not damaged, discolored or lower in karat, and the fix is to have it refinished. Yellow gold can be rhodium plated too, sometimes for a two-tone effect, but when it wears the contrast between white skin and yellow metal is far more visible, which is why jewelers advise against it as a permanent look. Our yellow gold vs white gold vs rose gold guide covers choosing between them. White gold jewelry at Aquamarise is solid 10K, 14K or 18K gold made to order in three to six weeks, with platinum offered as the naturally white alternative in the same designs.

Esme ring in 14K white gold with a white center stone and aquamarine accents, worn on a hand.

Why Sterling Silver Gets a Rhodium Finish

Whiter than silver, harder than silver, and a barrier against the air.

Sterling silver is 92.5 percent silver and 7.5 percent other metal, usually copper; our guide to 925 sterling silver covers the alloy, its marks and its history. Bare sterling tarnishes: silver reacts with traces of hydrogen sulfide in the air to form a dark film of silver sulfide. Rhodium does not react with air at room temperature, so a rhodium layer over sterling is a tarnish barrier for as long as the layer is intact. That is the main reason the finish is used on silver.

The other two reasons are the same as for white gold. Rhodium is whiter and colder than silver, so a rhodium-finished piece reads as the bright white of platinum rather than the softer white of polished silver. And it is far harder than silver, which sits at 2.5 on the Mohs scale, the same as gold; the finish takes the fine scratches bare silver would take, and takes them more slowly.

Every piece in our sterling silver rings and sterling silver jewelry collections is solid 925 sterling silver with a rhodium finish, and the practical consequence is a short care rule. Clean a rhodium-finished piece with warm water, a drop of dish soap and a soft cloth, and skip everything made for bare silver: abrasive polishing cloths and tarnish-removing pastes work by taking off the top layer of metal, and on a rhodium finish the top layer is the finish, while silver dips treat a problem the finish does not have. The full routine is in how to clean sterling silver and on our jewelry care page.

Aquamarine and moonstone leaf ring set in rhodium-finished sterling silver, oval blue center with marquise moonstone leaves
Shop the Look

Sterling Silver Engagement Rings

Solid 925 sterling silver with a rhodium finish, handcrafted around natural and lab-grown stones.

Shop Sterling Silver Engagement Rings

How Long Rhodium Plating Lasts

Measured in wear, not years. Here is what spends it.

Nobody can honestly put a number on it without knowing the thickness of the layer and the life of the hand. A pendant on a sweater can keep its finish for many years; a daily ring loses it first wherever it touches something else. We do not promise a lifespan for the finish on our own pieces, and you should be skeptical of anyone who promises one for theirs.

Celtic knot moonstone engagement ring set in sterling silver, a pear-shaped moonstone with knotwork shoulders, worn on a hand.
  • Contact points. The underside of a band, the side of a ring that sits against its neighbor in a stack or a matching set, the tips and shoulders of prongs, the clasp of a bracelet.
  • Hand washing. Not the water, the rubbing: soap, towel and sanitizer, hundreds of times a month.
  • Chlorine and harsh cleaners. Chlorine is the standard reason jewelers tell you to take rings off before a pool or hot tub, and bleach-based cleaners belong on the same list.
  • Abrasives and grit. Gardening, sand, gym equipment, abrasive polishes and a buffing wheel at a bench that does not know the piece is finished all remove metal.

What refinishing involves

Renewing the finish is a routine bench job: the piece is cleaned, lightly polished if the metal has picked up scratches, and run through the rhodium bath again. Stones usually stay in place, the stamp inside the band is untouched because the layer is far too thin to fill it, and the ring comes back the color it was when new. Jewelers price it as a small service that varies with the piece and the current price of rhodium, a fraction of the cost of the ring. For an Aquamarise piece, our repairs and resizing page explains how to reach us with photos and an order number.

Rhodium Finish vs Platinum, Palladium White Gold and Bare Sterling

Six white metals, one table. Hardness is Mohs, from the element data.

Metal Color Needs renewal? Hardness and scratches Skin note Price band
Rhodium finish over sterling silver Bright mirror white Yes, when the finish thins at contact points Rhodium (6) over silver (2.5); the finish resists fine scratches, the silver beneath still dents Rhodium is inert; standard sterling is silver and copper Lowest
Rhodium finish over white gold Bright mirror white Yes; the alloy shows warmer as it wears Rhodium (6) over a gold alloy (pure gold 2.5); nickel white gold is the harder alloy Depends on the alloy beneath: nickel or palladium white High
Palladium white gold, unfinished Soft warm gray-white No finish to renew; can be rhodium finished by choice Softer alloy than nickel white gold; scratches and polishes like gold Nickel-free by design High
Platinum (950) Cool gray-white, a shade less bright than rhodium No; the color is the metal all the way through 3.5; scratches more easily than a rhodium skin; the color never changes One of the least reactive metals Highest
Bare sterling silver Warm white No finish, but needs regular polishing against tarnish 2.5; scratches easily and darkens in air Standard alloy is silver and copper Lowest
Titanium / tungsten carbide Gray to dark gray No Titanium 6; tungsten carbide about 9 to 9.5, the most scratch-resistant Titanium is widely tolerated; tungsten depends on its binder Low to mid

The decision is simpler than the table: platinum if you never want to think about color again (platinum vs gold weighs the two); white gold from the solid gold rings if you want gold's value and accept occasional refinishing; rhodium-finished sterling for the same look at the lowest price; titanium or tungsten for a band that will be knocked about. Our precious metal guide sets the metals side by side.

Rh · 45Symbol and atomic number
1803Discovered by Wollaston
Mohs 6Rhodium hardness
About 80%Of supply goes into catalytic converters

Black Rhodium vs Black Ruthenium

Same bench, same behavior, different metal.

Black rhodium is rhodium deposited from a bath formulated to come out dark gray to charcoal instead of white. Black ruthenium is a deposit of ruthenium, rhodium's neighbor on the periodic table: another platinum-group metal that does not tarnish at room temperature and is routinely electroplated as a thin, hard film. Both are finishes over a solid base metal, both show the metal at worn edges, and both can be redone. Aquamarise's dark pieces, including the black ruthenium jewelry and women's black ruthenium wedding bands collections, are black ruthenium over solid 925 sterling silver, not black rhodium. More in what is black ruthenium.

Blue moissanite fairy leaf band in 14K white gold, worn on the ring finger.

How to Tell What You Have

The stamp tells you the metal. Only the seller tells you the finish.

No hallmark or quality mark shows plating. A "925" or "Sterling" stamp means the metal is at least 925 parts per thousand silver; "14K" means 14 parts in 24 are gold; an unqualified "Platinum" or "Plat" mark means at least 950 parts per thousand platinum. In the United States the duty runs the other way: the Federal Trade Commission's Jewelry Guides state that it is unfair or deceptive to fail to disclose a surface-layer application of rhodium on products marked or described as precious metal. Honest listings for sterling and white gold say so; ours do.

  • Rhodium finish or bare silver? Rhodium is colder and more mirror-like; polished silver is a shade warmer. Worn bare silver shows a gray-to-black bloom in its recesses; a rhodium finish never does, and where it has worn you see a slightly warmer patch with a crisp edge at the contact point.
  • Rhodium finish or platinum? Platinum is a touch grayer and much heavier for its size. Look for the platinum mark.
  • Precious metal or base metal under the rhodium? The question that matters. On a cheap listing, "rhodium plated" often means brass or a zinc alloy underneath. Look for a fineness stamp, which a plated base-metal piece usually lacks; read the metal line, not the title, for "sterling" or "925"; weigh the price against the metal. Do not trust the magnet trick: brass, zinc, silver, gold and rhodium are all non-magnetic, so a ring that fails to stick proves nothing.
  • Vermeil or rhodium? Different finish, same logic. Under the same FTC guides, vermeil is sterling silver coated with gold of at least 10 karats and at least 2.5 microns thick. The comparison is in gold vermeil vs gold plated vs gold filled; the pieces are in gold vermeil jewelry.

Sources for the chemistry and market figures in this guide: the Royal Society of Chemistry's rhodium entry and the US Geological Survey's 2026 Mineral Commodity Summary for platinum-group metals.

Rhodium Plating FAQ

Is rhodium plated jewelry good?
It depends on what is under the rhodium. Over solid sterling silver or solid gold it is the best white finish available: brighter than either metal, harder, tarnish-free and renewable. Over brass or a zinc alloy it is a thin disguise that wears through. The words describe the surface only; judge the piece by its fineness stamp.
Does rhodium plating wear off, and what are the downsides?
Yes, by friction. The layer thins first at the underside of a band, against a neighboring ring and at prong tips, and the warmer metal beneath shows through. The downsides follow: periodic refinishing for a daily ring, a no-abrasives care rule, and a layer that can hide a base metal on cheap jewelry.
How long does rhodium plating last on sterling silver or white gold?
There is no honest number without knowing the thickness and the wear. A pendant can keep its finish for many years; a daily ring loses it at contact points far sooner, faster still with chlorine, abrasive polishes and grit. A flash and a two-micron deposit look identical when new. We do not promise a lifespan for the finish on Aquamarise pieces.
Can rhodium plating be redone, and what does it cost?
Yes. Refinishing is a routine bench job: the piece is cleaned, lightly polished if needed and run through the bath again, with stones normally left in place. Jewelers price it as a small service that varies with the piece and the current rhodium price, a fraction of the price of the ring. For an Aquamarise piece, start with our repairs and resizing page.
Rhodium plated vs sterling silver: which is better?
They are not alternatives. Rhodium is a finish, so the real question is whether you want sterling silver bare or finished in rhodium. Finished is brighter, whiter, harder and does not tarnish while the layer lasts, but must be cleaned without abrasives and eventually refinished. Bare sterling has silver's softer warm white and needs polishing. The alloy is the same either way.
Is rhodium hypoallergenic and safe for sensitive ears?
Rhodium is a platinum-group metal, inert in metallic form, and allergy to it is rare; on white gold it also puts a layer between skin and any nickel in the alloy for as long as the layer lasts. What matters for sensitive skin is the alloy underneath, the subject of is sterling silver hypoallergenic.
Can yellow gold be rhodium plated?
Yes. Any gold alloy can be plated, and yellow gold sometimes is for a two-tone effect or to match a white gold band. It is a poor permanent choice: the moment the layer thins at a contact point, the contrast between white skin and yellow metal is obvious, far more so than on white gold, where the alloy beneath is only a warmer gray.
Does rhodium plating make jewelry waterproof?
No. Rhodium itself does not corrode in water, but a layer a couple of microns thick on a solid metal ring is not a seal; there is nothing to keep water out of. It protects only the surface it covers, for as long as it covers it. Wet hands are harmless; chlorine, hot tubs and abrasive cleaning are what shorten its life.
What is rhodium worth, and is it more expensive than gold?
Often, by a wide margin. The US Geological Survey puts the 2021 annual average at $20,254 a troy ounce against $1,801 for gold, falling to $4,660 in 2024 and an estimated $5,800 in 2025, when gold averaged an estimated $3,300. A plated ring carries only milligrams of it, so rhodium-finished sterling is worth what the silver is worth.
Does rhodium tarnish?
No. Rhodium is not corroded or tarnished by the atmosphere at room temperature and does not normally form an oxide even when heated, which is why it is used as a surface over silver, which does tarnish. A rhodium-finished piece that darkens has worn through to the metal beneath or picked up residue that soap and water will remove.

Solid Silver and Gold, Finished in Rhodium

Handcrafted in solid 925 sterling silver with a rhodium finish, or made to order in solid gold and platinum in 3–6 weeks. Free US shipping, a free one-time size exchange, engraving available and 14-day returns.

Shop Sterling Silver Rings

Leave a comment

Keep reading

Maeve vintage moonstone engagement ring in sterling silver, photographed on a white marble and labradorite plinth in soft daylight (portrait banner)
Metal Guides

What Is Rhodium Plating? Silver, White Gold and How Long It Lasts

Rhodium plating is a thin electroplated layer of a rare platinum-group metal over white gold or sterling silver. What it is, how thick it is, why it wears at contact...

Read more
Teardrop alexandrite pendant necklace in sterling silver, photographed draped over a glass bottle on a mirror tray (portrait banner)
Metal Guides

Is Sterling Silver Waterproof? Showers, Pools, the Ocean and Sweat

Sterling silver is not damaged by water itself but by what water carries: chlorine, salt, sulfur and heat. An activity-by-activity verdict for showers, pools, hot tubs, the ocean and sweat,...

Read more
Emerald-cut light blue fire opal ring with opalescent purple sapphire accents in 14K rose gold vermeil beside a hammered black tungsten men's band with light blue opal inlay on lavender ribbon, Aquamarise couples ring set banner
Gemstone Guides

Opalite vs Opal: What Opalite Is, How to Tell Them Apart, Which to Buy

Opalite versus opal explained: a trade-name glass against a hydrated silica mineraloid, the scattering physics behind opalite's blue-and-orange glow, home tests that work, lab-created opal and the other things sold...

Read more

Free U.S. Shipping

Worldwide Delivery

2M+ Followers Across Platforms

38K+ Reviews Across Our Store & Etsy

Warranty & Easy Returns

Ethically Sourced Gemstones